NC hydraulic tube bender
Semi-automatic fixed-radius bending for straightforward parts and manageable batches.
PROCESS OVERVIEW
How the process fits your production
Tube bending controls feed, rotation and bend angle around a forming die. Tooling and support manage wall thinning, wrinkles and ovality for the required radius.
- Hydraulic bending
- Programmed angle setup
- Feed/rotation control to confirm
- Part-specific fixed-radius dies
Typical applications
- Furniture and railings
- Agricultural parts
- Prototype tube work
Material considerations
Round, square and shaped tubes. Feasibility depends on wall thickness, material strength, diameter and radius.
Select around the finished part
Confirm which motions are controlled and which are manual. Review feed stops and rotation setup for the full part.
Prepare your inquiry
Supply a 3D drawing with centerline radii, tube dimensions and material. Check collisions, straight lengths, mandrel needs and acceptable surface marks.
Discuss this machine type →Technical selection requirements
Compare these fields with the proposed model's technical sheet. Material, part geometry and the configured options determine the working capacity.
| Specification | Configuration requirement |
|---|---|
| Control | Bend, feed and rotation scope. |
| Tooling | Radius dies and mandrel/support needs. |
| Tube | Profile, wall thickness, length and material. |
| Geometry | Radius, angles and straight lengths. |
| Control | Feed, rotation and bend-axis sequence. |
| Tooling | Bend dies, pressure die, wiper and mandrel. |
This page describes a machine architecture. Rated capacities, delivery scope and available options are confirmed for the selected SNSIE model.
Request a model-specific technical sheet →Compare machine types
Discuss your next machine.
Share your sheet-metal processing requirements with SNSIE.